23
Action to be take before long-term storage (longer than a month)
Entire joint cutter
- Clean thoroughly
- Check watertight
- If there are leaks, correct defect
Fuel tank
-
Empty fuel and fill with clean fuel
up to the lower edge of filler neck
Engine
- Check oil level, if necessary fill to
upper oil-level mark
- Check air filter, clean, replace if
necessary
- Check fuel filter, change if
necessary
All bare parts/accelerator/accelerator
control cable/fastening bolts
- Oil/grease
If the machine is to be stored for longer than six months, then contact the Weber
service organization to discuss additional measures.
