manualshive.com logo in svg

Weber mt PG 110, Operating And Maintenance Manual

The Weber MT PG 110 is a versatile and powerful compactor that is perfect for a variety of construction projects. Ensure efficient and safe operation by downloading the Operating and Maintenance Manual for free from manualshive.com. This comprehensive manual will guide you through proper care and operation of the equipment.

Share
Download
background image

PG55_110 9

Device description

The trowel machines of the PG series are used in general building construction applications.

Drive

The machine is propelled by an air-cooled Robin-Subaru gasoline engine

.

Function

The force generated by the engine is transmitted to the gearbox of the trowel machine by 

the centrifugal clutch and a V-belt. The troweling blades and the troweling pan attached to 

the gearbox smooth the concrete or screed.

Operation

Start the Robin-Subaru gasoline engine with the attached reversing starter. After starting, the 

engine speed is regulated with the gas lever attached to the manual guidance rod. The adjusting 

lever fitted at the manual guidance rod is used to adjust the angle of the troweling blades.

Summary of Contents for PG 110

























Reviews:

No comments

Related manuals for PG 110

Brands by name

Popular brands

Load more brands