46
1
3
2
4
3
4
2
2
10.2.9. Changing the hydraulic oil filter
Shut off the machine as described in section 5.8.
Open the hoods as described in section 10.2.1.
Open the cap (1).
Slowly pull the hydraulic oil filter (2) with the
protective cage (3) out of the enclosure (4).
Pull the hydraulic oil filter (2) out of the protective
cage (3).
Slide the protective cage (3) back into the
enclosure (4).
Insert a new hydraulic oil filter (2) into the
protective cage (3) housed in the enclosure (4).
Push the hydraulic oil filter (2) all the way down.
Fill the hydraulic oil tank through the hydraulic
oil filter until the fill level indicator in the view
glass shows approx. ¾. Refer to the table
included in section 10.3 for the relevant
specifications of the hydraulic oil.
Close the cap (1).
ATTENTION
Properly dispose of the used hydraulic filter
in accordance with environmental protection
regulations.
Risk of environmental damage.
Summary of Contents for MC 85
