26
CR7
3.3.7 Hydraulic Control
The switch head (24/2) is filled with hydraulic oil. Switching is effected
upon actuation of the switch lever (24/1). A hydraulic line connects the
reaction end socket (26/1) and the switch head.
Important!
In case of switching problems, proceed as follows:
- Remove the oil filler screw (25/2) of the switch head (25/1).
- Add hydraulic oil according to the specifications in paragraph 3.4 up to the
middle of the sight glass (25/3). (Handle in vertical position).
- Fasten the oil filler screw (25/2).
- Bleed the hydraulic system by loosening the bleeding screw (26/2) at the
reaction end housing (26/1).
- Firmly tighten the bleeding screw (26/2) again.
Check the oil level once again!
Figure 24
Figure 25
Figure 26
2
1
1
3
max.
1
2
2
Summary of Contents for CR 7
Page 2: ...2 CR7 ...
