CR 3-II Hd
15
1
Adjusting the guide bar
Adjust the desired work height of the guide bar with the
set screw (1).
Checking the engine oil level
Unscrew and remove the oil dip stick from the crankcase.
The correct oil level is between the min. and max. marks.
Stop operating the engine immediately when the oil level
reaches the min. mark and top up oil until it reaches the
max. mark. Risk of engine damage if the oil level drops
below the minimum oil level in unfavorable operating
conditions.
Max.
Min.
Checking the fuel level
Open and remove the gas cap, check the level, if necessary
top up to the lower edge of the filler neck with clean fuel in
accordance with the specification.
For work at the fuel system, have a suitable fire-extin
-
guishing agent ready.
Fire, naked light, and smoking is forbidden!
UPPER lEVEl
lOWER lEVEl
