10
The machine must be inspected in accordance with the corre-
sponding implementation conditions and operating conditions
to ensure its operationally safe status. This inspection should
be performed as needed by an expert – however, no less than
once a year. The findings of the inspection must be stored in
writing until the time of the next inspection.
Inspection
Cleaning work
Use clear water for cleaning. Do not use flammable solvents.
The vapors of the solvents may ignite upon contact with hot
components or other sparks.
Perform cleaning tasks only in rooms that are suitable and
have been approved for that purpose. Residual oil and
lubricants that may have been rinsed off have a negative
impact on the environment and must be collected by suitable
means (e.g. oil separator).
Safe handling of combustion
engines
Combustion engines pose a particular risk during operation.
Their exhaust emissions contain carbon monoxide, a colorless
and odorless gas that is extremely hazardous, which, if inhaled
even briefly, can cause unconsciousness and death.
Therefore, never inhale the exhaust gas.
The tamper of type SRV 590 is suitable for use in trenches
that are deeper than shoulder height if:
– the trench is at least 1.5 m wide and at least 15 m long,
– the trench is at least 1.5 m wide and at least 8 m long,
– the trench is at least 1 m wide and at least 15 m long.
