Webb WER41HP, Operator'S Manual & Parts List

Page: 6 / 28

INSTRUCTION MANUAL
Parts required:
4 x Bolts and 4 x Nuts
2a. Fit the right side Flash Nut,
Spring Cord Guide and Bolt.
2b. Fit the left side Flash Nut
and Bolt.
Remove and ensure you have all the parts
required for assembly (see page 2 for reference)
INSTRUCTION MANUAL
Attach lower handle bar bolts.
Take the weight of the handle
bar and fit the lower bolt first.
Pull the brake lever out of the
right side hole, tilt forward and
lower towards the mower.
Insert the end of the cable into
the hole in the lever and replace the
lever back into the hole of the handle.
INSTRUCTION MANUAL
Flash Nuts
5.
TIES
(WER41SP Only)
(WER41SP Only)
Pull the drive lever out of the
left side hole and lower
towards the mower.
Refit the lever into the hole in
the mower handle.
Fit the Cable ties
Pull the starter cord upto the
spring. Holding the cord at the
lower side of the spring, rotate
the string clockwise around
the spring.
Lift the Rear Flap with
one hand
Lower the Grass Catcher
Hooks onto bar, left & right