Webb 193801003, Original Instructions Manual

Page: 10 / 24

INSTRUCTION MANUAL
10
A. USING YOUR MOWER
SELF-PROPELLED – WER18SP Only
The self-propelled action allows the
user to let the machine to do your
work for them. The machine can also
be used as a ‘Push’ machine as well.
The speed of the mower is set at the
factory.
A1.
To action the self-propelled
motion, start the engine, begin to
push the machine and then engage
the drive, by pulling the drive lever
towards the main handle. The machine
will now drive forwards.
A2. When coming to the end of the
lawn, release drive lever to move the
machine to your next cutting exercise.
B
1.
B. MULCH PLUG
B1. The machine is supplied with
a mulch plug. This allows the user
to stop the cuttings from entering
the grass collector. The recycled
cuttings continue to move around
the underside of the cutting deck,
before landing on the lawn to
provide nutrients to the soil.
B2.
To remove the mulch plug from
the rear of your machine, open the
rear grass collector flap.
The mulch plug handle is positioned in
the exit chute of the lawnmower.
Press the tab, located on the inside
of the mulch plug handle and lift the
mulch plug. The mulch plug will now
be removed from the machine.
To refit the mulch plug, place it back
into the lawnmower exit chute. Press
the mulch plug handle tab and slot it
back into the recess.
C. REAR DISCHARGE
The machine can rear discharge
your lawn cuttings. This is useful
if cutting an orchard or small
meadow, allowing the grass to be
dispersed and not collected.
C1. Remove the grass collector and
allow the grass collector flap to sit
behind the machine. Grass will then
exit the lawnmower to the rear.
D. REAR COLLECTION
The machine is supplied with a rear
grass collector. The air created by
the rotating blade, forces grass to
the back of the collector.
D1.
To fit the grass collector, lift the
rear grass flap.
D2.
Attach the collector to the
machine, by placing the hooks of the
collector over the metal bar of the
machine.
*WER18SP Only
A
.
B
2.
C
1.
D
1.
D
2.