14
Ford Transit Vancouver
Vehicle and kit preparation
Refer to the manufacturer’s instructions as
necessary:
• Remove the driver’s seat.
• Remove the battery.
• Remove the overhead package tray.
• Remove the battery tray.
• Remove the upper trim from the b- through e-pillars on the left side.
• Install the auxiliary A/C compressor.
General References
NOTE: Due to production variation, some images in this manual may not represent the vehicle you are
working on.
• Bare sheet metal, for example around drilled holes, must be treated with anti-corrosive coating.
• Secure hoses, cables and wiring harnesses with cable ties and fit protective hoses around them at chafing
points.
• Fit edge protectors (heat-sleeve, grommet, split-loom, etc.) to sharp edges as necessary.
• Some components shown in this manual may be pre-production parts and may not be representative of current
production parts.
Parts Required for Preparation
Item
Number
Part Number
Description
Quantity
2
62U00025459
UNDER CHASSIS CONDENSER
1
11
5011741
BRACKET ANGLE CONDENSER REAR
1
12
5011706
BRACKET ANGLE CONDENSER FRONT
1
40
147729
M4 SCREW
6
41
5012013
M4 NUT
6
14
5012221
BRACKET ADAPTER VANCOUVER
1
4
5012085
VAC KIT VANCOUVER 12V W-THERMOSTAT
1
7
5001321
BOLT M6-1.0 x 20
4