Thermo Call TC3
12
-
Insert the micro-timer in a free slot of the
4-pin connector of the heater wiring har-
ness
Final connection and
commissioning
-
Connect the 12-pin connector of the
GSM module wiring harness to the mod-
ule
-
After connecting voltage, the button will
flash 2x cyclically
-
After approx. 1 minute, the button will
flash 1x cyclically and, depending on the
dial-in time of the SIM card, can take a to-
tal of up to 5 minutes until it is finally
ready for operation
-
As soon as operational readiness is
achieved, program the Thermo Call TC3
and put it into operation according to the
operating instructions
-
To query the firmware version send the
text message command "VERSION" to
the Thermo Call TC3
