Galaxy
D5W Z heater upgrade
15
- Connect the black and red or black and blue cable
(6) from blade-type fuse F3 to the blue cable (8) to
the diode group (input)
- Connect the black and red or black and blue cable
(3) to the heater (plug C311, PIN 7) to the blue cable
(1) from the diode group (output)
- Connect the black cable (5) from external
temperature switch N289 to the black cable (7) to the
diode group (input)
- Connect the black cable (4) to the heater (plug C311,
PIN 6) to the black cable (2) from the diode group
(output)
Concluding work
- Install all the removed parts in reverse
- Check that all electrical connections are tight
- Secure all loose lines and cables with cable ties
- Connect the car battery
- Affix the filling station sticker in a clearly visible position
- Switch on the heater as described in the operating manual for the digital timer or Telestart T70/80
Operating instructions for the end
customer
(Cut out and add to the vehicle operating manual.)
Make the following settings before you shut down
the car:
For vehicles without automatic
air-conditioning system only
1. Air vent to “WINDSCREEN”
2. Temperature control to “MAX”
3. Blower control to setting “2”
5
4
3
6
8
1
7
2
25