5
To manually adapt the fan speed:
X
X
Tap the fan
symbol.
X
X
You can now change the displayed fan speed
by tapping Plus
or Minus
.
X
X
Tap (A) when you wish to return to automat-
ic mode.
The Settings menu is automatically exited after
30 seconds and the value last set is adopted.
Note
Alternatively:
Save and exit menu immediately:
X
X
Tap Previous
.
9
System settings
The operating logic is explained based on the
Timer function. The explanation also applies to
other setting levels or functions.
Fig. 5
1/3
Timer
Brightness
Language
Settings
English
01:00
50
Example, Settings, setting level 1
To call up settings:
X
X
Tap the Settings
symbol.
The Settings menu opens up.
X
X
Tap
or
to select the various settings.
X
X
Tap Timer
1/3
Timer
Brightness
Language
Settings
English
01:00
50
. The setting window for this
function opens up.
Fig. 6
00:50
01:00
02:00
End-Timer
Timer
X
X
Tap
to reduce the time interval or tap
to increase the time interval.
The
symbol marks the current selection.
X
X
Tap on the required time to set the time in-
terval.
X
X
Tap the Previous
symbol to go to the pre-
vious level. The selected settings are then
adopted.
or:
X
X
Tap the Home screen
symbol to return to
the Home screen.
The selected settings are then adopted.
9.1
Selecting Settings menu
You can call up the Settings menu from the
Home screen:
X
X
Tap the Settings
symbol.
The Settings menu opens up. The available
functions are:
9.1.1
Timer
Sets the start and stop times of the air handler.
With the system already switched on:
The timer acts as a remaining time counter. The
air handler switches off automatically after the
set time runs down.
With the system switched off:
The timer acts as a start timer. The air handler
starts up automatically after the set time has
elapsed.
It is not possible to program a switch-on and
switch-off time at the same time.
9.1.2
Brightness
Adapts the screen brightness to the ambient
light levels.
9.1.3
Language
Sets the operating language.
