Switch on
Manual: Press the
button (continuous heating mode)
Automatic: By programming the start time
Switch off
Manual: Press the
button again
Automatic: By programming the operating period
When heater unit is running: By setting the remaining time
Set time/date
Press the
button for more than two seconds - the time flashes -
set the time using the
and
buttons - the day flashes - set the
day.
View time
Ignition off: Press
button
Program start
time
Press the
button - program number flashes - set the start time us-
ing the
and
buttons - the day flashes - set the day. If you press
the
button several times, you can set the program numbers 2 and
3 or go to the time mode.
View/Delete
selected times
Press the
button several times until the required program number
is displayed. To delete the selected time press the
button until the
time is displayed with no program numbers.
Program
operating time
The heater must be switched off. Press the
button for three sec-
onds - the operating duration flashes - set the required operating du-
ration using the
and
buttons (10 to 120 minutes).
Set remaining
time
Set the required remaining time (1 to 120 minutes) using the
and
buttons. The remaining time is the time that the heater will con-
tinue to operate. It can only be changed whilst the heater is operating
and the ignition is off.
Remote control
Possible using an external optional immediate heat button.
Vehicles
with ADR
equipment
It is not possible to set a time on ADR vehicles. The remaining time
will be shown on the display whilst the heater is operating. The time
can be adjusted.
Visit www.butlertechnik.com for more technical information and downloads.
www.butlertechnik.com
