8
REMOVING BOBBIN
1) Turn machine over until bobbin case sets in position shown.
(Figure 13)
2) Pull back tab
(A)
to release bobbin case.
3) Lift base of bobbin case out to remove bobbin.
(Figure 14)
When closing bobbin case, be sure it snaps into the tab.
INSERTING BOBBIN
1) Slip the thread from the bobbin into the slot
(B)
at the base of the bobbin case.
(Figure 15)
2) Continue pulling thread under the tension spring until it rests in the fork
(C)
of the spring.
(Figure 16)
Important Note:
The bobbin should always be inserted so thread unwinds counterclockwise
to ensure consistent tension.
(Figure 17)
REMOVING & INSERTING BOBBIN
Figure 13
Figure 15
Figure 14
A
B
B
Figure 16
C
C
Figure 17
