background image

TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS

WARNING!

To reduce the risk of serious injury, read the following safety instructions before assembling and using the product. 
No responsibility is accepted for damages or injuries resulting from improper installation or noncompliance with these instructions.
Please note that the Manufacturer has no control over the elements such as wind, heavy snow or rain. The Manufacturer cannot 
control the location or soil conditions into which the canopy is placed. The Manufacturer, without control of the elements, location 

This product is a temporary structure and is not recommended as a permanent structure.
Choose your canopy

s location carefully. Install your canopy on flat horizontal ground only. 

Ensure enough clearance around the product. Before assembling the product, find level ground not less than 

6' (1.8 m) away from any structures or obstructions, such as fences, garages, houses, etc.
Check for overhead utility lines, branches, laundry lines, etc. Do not install near roofs or other structures that may

 shed snow, ice 

canopy

or excessive run-off onto your 

. Keep away from electrical wires!

Check municipal by-laws before setting up the product.
Get an overview of all parts before attempting installation. Make sure all components are present.
Do not use this product in environments for which it is not intended (i.e. extreme cold, high winds, extreme heat, heavy rainfall, etc.).

Always wear safety glasses when assembling this product. Wear gloves when working with tubing to prevent cuts or abrasions.

Any assembly or maintenance on the product must be carried out by adults only.
Make sure you have the necessary manpower when assembling or moving the product.
Keep children and pets away while setting up the product.
CAUTION! Always keep children under close supervision while they are using this product or are in its vicinity. 

Never leave children unattended.

Proper anchoring, keeping the cover tight and free of snow and debris is the responsibility of the consumer. Damages caused by improper

anchoring are not included in the warranty. 

WARNING! Keep all flames and heat sources away from this fabric canopy. The fabric will burn if left in continuous contact with a flame source.

Do not use hard-edged tools or instruments, such as rakes or shovels, to remove snow. These may puncture the cover.

This 

 is 

 

canopy

not meant to hold heavy snow or ice loads. Snow or ice accumulation may cause your canopy to collapse. To avoid overload,

 brush snow and ice from the roof with a broom or mop.

NEVER clear the roof of snow or debris from inside the shed to avoid collapse, damage to property, personal injury and/or death.
Remove accumulated water from the roof immediately or disassemble the 

 in order to avoid any damage.

canopy

FOR FUTURE REFERENCE

INTENDED USE

This temporary 

 is intended to offer protection from damages caused by the sun, light rain, light snow, tree sap, bird and animal excrements. 

canopy

or soil conditions, cannot be held responsible for damages caused by the shed to other items or damages to the shed itself.

Do not use alkaline detergent for cleaning. It will damage the 

  

polycarbonate material.  Soap and warm water are recommended.

IMPORTANT! READ CAREFULLY AND RETAIN

Do not use it to 

 

shield goods from high winds, heavy snow or ice storms. Only use it for its intended use.

2

Important safety instructions ...................................................................................................................................................................................... 2

Parts list ....................................................................... ............................................................................................................................................ 3
Assembly preparation ....................................................................... ......................................................................................................................... 3 
Assembly ....................................................................... ....................................................................................................................................... 4 - 7

Important notice ....................................................................... ..................................................................................................................................8

 ............................................................................................................................................................................................................ 2

Intended use

Summary of Contents for 1934796









Reviews: