User’s Manual
Page 106 of 117
Weatherdock AG Sigmundstraße 180 D-90431 Nürnberg
Tel.:+49 911 37 66 38 30 www.weatherdock.de
24
TrOUBLESHOOTING
Problem
Cause
Solution
Unable to
connect to
easyTRX2
USB cable
connected
correctly?
Install the Windows driver for the
USB serial interface (FTDI) from the
internet. (For Windows select the
„recommended“ driver installation.)
Device
configured
properly?
Repeat configuration, if necessary
contact your service partner
No data output
not connected
Check connection; are cable colors
correct? Is the data output of the
easyTRX2 device connected with the
data input of the plotter?
Is the data rate of the NMEA port of
the plotter correct?
(necessary value 38400 baud!)
Entering MMSI
not possible
MMSI used
before?
The MMSI cannot be programmed
twice. The device must be sent to the
main importer to reset the MMSI.
