Page 9 of 25
Weatherdock AG Sigmundstrasse 180 D-90431 Nürnberg
Tel.:+49 911 37 66 38 30 www.weatherdock.de
2.1.2.
Button "TEST"
Pressing the button „TEST“ the easyRESCUE enters the test
mode. If this button is pressed again for 3 seconds, the test
mode will be terminated and the device is turned off.
2.1.3.
Button "ON"
With the button „ON“ the device can be activated in case of
distress. The “active” mode can be terminated by pressing
both buttons together for 3 seconds. The easyRESCUE stops
AIS transmissions and turns off.
2.2.
Indicators
2.2.1.
GPS LED
The green LED with the marking „GPS“ is blinking, when the
device receives GPS signals and is able to get a position fix. If
the GPS LED does not blink, there is not GPS reception
possible.
2.2.2.
ON LED
The green LED with the marking „ON" is blinking, when the
easyRESCUE is activated in case of distress.
2.2.3.
TEST LED
The yellow LED with the marking "TEST" is blinking, when
the easyRESCUE is in test mode.
2.2.4.
Flash-LED
The white LED is flashing, when the easyRESCUE is in “ON” or
“TEST” state. It is used to support the search in darkness.
