1
Operations
Setting the 7-Channel Weatherband Radio
a.
Press the POWER button to power on the unit.
• FM Radio, AM Radio, AUX, or WB Radio will appear on the LCD when the unit is powered on.
b.
Press the FUNCTION button and select Weatherband Radio.
• “WB” will appear on the LCD when the Weatherband Radio has been selected.
c.
Find your State/Province and County in the “Weatherband County Codes” section on page 12.
d. Press the TUN- or TUN+ buttons to cycle through the 7 Weatherband radio stations, and select the num-
ber that matches your County Code from the included list.
• Extend the FM antenna to improve WB reception.
8VLQJWKH$&2XW3RZHU:0D[LPXP2XWSXW
a. Plug an AC appliance into one of the two AC outlets.
b. Press the AC Power switch to turn the AC power on, the AC Power Indicator will illuminate when the
AC power is on.
c. Use the appliance freely, and remember to recharge the unit afterwards.
• This unit has built-in protection against output overload in the AC sockets. If you connect an appli-
ance that draws more than 200W, or one which draws excessive surge power, the power to the AC outlet
automatically shuts off. To resume AC outlet use, switch off the AC power switch ,and then switch back
on.
• See the Run Times Chart on page 7 for length of use times.
Using the DC Out Power
a
. Plug a DC appliance into the DC outlet.
b
. Press the DC Power switch to turn the DC power on.
c
. Use the appliance freely, and remember to recharge the unit afterwards.
• See the Run Times Chart on page 7 for length of use times.
