3.
Open the Door, cut and adhere
Weatherstripping to fit inside the Door
where it touches the Rear Body Assem-
bly (
see Figure 4.). Be sure you don’t
cover the latch hole.
6.
Place the assembled unit on the ve-
hicle roof rack, positioning as shown in
Figure 7., and allowing for rear door
swing-up when installed on some mini
vans.
4.
Cut and adhere Weatherstripping to
fit the attaching flanges on the Front
Body (
see Figure 5.).
5.
Fasten the Front Body to the Rear
Body Assembly (
see Figure 6.). It will be
necessary to poke the bolts through the
adhered Weatherstripping.
Figure 4.
Door Assembly Weatherstripping
Figure 5.
Front Body Weatherstripping
Figure 6.
Rear Body Assembly to Front Body fastening
1/4-20 Nylon
Lock Nut
(10 places)
Rear Body
Assembly
1/4" Flat
Washer
(20 places)
Front
Body
1/4-20 x 3/4"
Hex Head Bolt
(10 places)
Weatherstrip
(cut from bulk)
Weatherstrip
(cut from bulk)
Attaching
Flanges
Front
Body
Figure 7.
Mini Van Door Clearance
3
