D. C. jack
Control Panel with LED
D. C. jack
Power indication lamp
Recharging Battery:
1.
To ensure the best performance of the rechargeable battery and lengthen
its lifespan, the battery is best used after fully charged for 5 hours every
time.
2.
Before charging, make sure the battery is correctly installed and the power
switch is turned to “OFF” position.
3.
To recharge, plug the output of the d.c. adaptor into the D.C. jack plug of the
product and the input into the AC power outlet.
4.
When charging, the “Power indication lamp” on the control panel of the
vacuum
cleaner
(as below diagram) will flash green, and it will stay green when the product
has been uninterruptedly charged for 5 hours .
5.
When the
vacuum cleaner
is in “Battery Low” situation, the “Power indication
lamp” on the control panel (as below diagram) will stay in RED.
＊
If you forget to turn off the power of the vacuum cleaner before charging, after the cleaner
is fully
charged, you have to turn off the cleaner and turn on again to make it start cleaning.
INSTALLATION GUIDE
3
0
M
a
x
