Installations
12
Carefully follow the steps below in order to install the DDR2 DIMMs:
1. To avoid generating static electricity and damaging the DDR2 DIMM,
ground yourself by touching a grounded metal surface or using a ground
scrap before you touch the DDR2 DIMM.
2. Do not touch the connector of the DDR2 DIMM. Dirt residue may cause
a malfunction.
3. Hold the DDR2 DIMM with its notch to the front side of the IP-M945A
Series and insert it completely into the socket. A DDR2 DIMM should be
inserted into the inner socket first. Guiding the hole at each end of the
DDR2 DIMM over the retaining post at each end of the DDR2 DIMM
socket.
4. If you install two DDR2 DIMMs, install the second DDR2 DIMM using the
same procedure as above.
5. If DIMM does not go in smoothly, do not force it. Pull it all the way out
and try again.
6. Make sure the DDR2 DIMM is properly installed and locked by the tabs
on both sides of the socket.
Removing a DDR2 DIMM:
To remove the DDR2 DIMM, use your fingers or a small screwdriver to
carefully push away the plastic tabs that secure the DDR2 DIMM at each
end. Lift it out of the socket.
Make sure you store the DDR2 DIMM in an anti-static bag and must be
populated the same size and manufactory of memory modules.
