Wealden Rehab N3242-1 Heron Lift E Operation & Maintenance Manual Download Page 3

3

Care Equipment Excellence

www.wealdenrehab.com 

     wealdenrehab 

01634 813388 
[email protected]

1 General Information 
2 Equipment Description

Congratulations! You have purchased a high quality product, designed and built to serve you for a long time, as long as you follow 
the instructions for use and maintenance described in this manual.
Please note that we might modify some technical features, without notice, as part of our ongoing product improvement process.
Please read these instructions carefully before using the equipment
Manufacturer: Chinesport S.p.A., Via Croazia No. 2, 33100 Udine - Italy

Purpose and content of these instructions

Customers must read this manual carefully in order to use the equipment properly, safely and autonomously.
Information on equipment specification, operation, maintenance, spare parts and safety can be found here.
Chinesport refuses all responsibility for damage to people and/or property resulting from failure to comply with 
these instructions.

Target readership

This manual is intended for users (therapist - attendant), it must always be kept with the equipment and stored in  
a safe place for future reference.

2 Equipment Description

Intended use & operation

Electric hoist for easy transfer of disabled users into a swimming pool. Painted stainless steel.
Available versions: HERON with a sling bar and HERON with an integral removable seat.
The equipment can rotate 360° and is fixed to the floor by means of an external floor plate (N2465) or a recessed lift socket 
(N2463).
HERON with an integral removable seat requires item N5429 Heron Seat Transporter Base to be attached to the seat for indoor 
patient transfers (Fig.4).

Environmental conditions

The equipment can only be used in indoor swimming pools.

Storage

The following environmental conditions must be ensured when the equipment is to be stored:
• relative humidity: 10% - 90 %
• temperature: -10 °C - +50 °C
If the product is to be stored for a long period of time, it is necessary to:
• leave the emergency button depressed
• check operation of the hoist actuator and recharge batteries at least every six months.

Summary of Contents for N3242-1 Heron Lift E












Reviews: