We PROTEUS-III, User Manual

Page: 72 / 244

WIRELESS CONNECTIVITY & SENSORS
User manual Proteus-III
7.2.3. CMD_SECURITY_IND
This telegram indicates the security status and the
FS_BTMAC
of the connected device. This
indication message is the result of a connection request (
CMD_CONNECT_REQ
).
Format:
Start signal Command Length Status BTMAC CS
0x02 0x88 0x07 0x00 1 Byte 6 Bytes 1 Byte
Status:
0x00: Encrypted link to previously bonded device established
0x01: Bonding successful, encrypted link established
0x02:
No bonding, pairing successful, encrypted link established
7.2.4. CMD_CHANNELOPEN_RSP
This command is sent to the host as soon as connection setup and service discovery has
been completed successfully. Now data can be transmitted using the
CMD_DATA_REQ
. Next to
the
FS_BTMAC
of the connected device, the maximum payload size that is supported by the
link is part of this telegram. This indication message is the result of a connection request
(
CMD_CONNECT_REQ
).
Format:
Start signal Command Length Status BTMAC Max payload CS
0x02 0xC6 0x08 0x00 1 Byte 6 Bytes 1 Byte 1 Byte
Status:
0x00: Success
7.2.5. CMD_DISCONNECT_REQ
This command shuts down the existing connection. Thereafter the module prints a
CMD_DISCONNECT_CNF
to confirm that the request has been received, the indication message
CMD_DISCONNECT_IND
follows which determines whether the disconnection operation has been
performed successfully or not.
Format:
Start signal Command Length CS
0x02 0x07 0x00 0x00 0x05
Response (
CMD_DISCONNECT_CNF
):
Order code 2611011024000
70
Version 1.8 , July 2022 www.we-online.com/wcs