5
Installation Procedure
Luminaire is factory sealed and does not need to be opened during installation.
1) Switch off the mains electrical supply.
'HWHUPLQHSRVLWLRQRIWKHƂ[LQJVFUHZV
D
(not supply by WE-EF).
&KHFNSURGXFWGLPHQVLRQSDJHDERXWWKHGLVWDQFHRIWKHGULOOLQJKROHV'ULOOFRUUHVSRQGLQJƂ[LQJKROHVDQG
insert dowel
E
QRWVXSSO\E\:(()FKRRVHVXLWDEOHƂ[LQJPDWHULDO
Attention:
Make sure not to damage any electrical cable, water pipes or other devices.
3) Install wall bracket
B
to luminaire
A
DQGƂ[LWDSSO\LQJ1PRISUHVVXUHE\XVHRIWKHVFUHZV
G
.
4) Install the luminaire
A
to the determined position by use of the screws
D
.
5) Connect leads of cable
C
to main supply via suitable connector of customer’s choice (L = Phase, N = Neutral,
= Earthing, DA/DA = DALI control line).
6) After the luminaire
A
is connected, the bracket can get adjusted by loosening and respectively tightening
screws
G
.
5HPRYHƂOPIURPWKHOHQVEHIRUHXVH
