2
Light Source
LED
Maintenance
Apart from cleaning the product's exterior surfaces, no special maintenance work is required. Do not use high-
pressure cleaners.
In case of component failure due to abnormal circumstances or at end of life, replacement must be carried out
E\DVXLWDEO\TXDOLƂHGDQGWUDLQHGSURIHVVLRQDO
Cover
I
can be removed after untightening screws
J
. One of the screws
J
is hidden behind bracket
D
. It can be
DFFHVVHGE\SXVKLQJHODVWLFƃDS
K
into bracket.
When replacing a damaged main lens
L
, tighten holding screws with torque wrench set at 1.0 Nm.
Warning:
Do not open luminaire while mains supply is switched on.
