Installation Procedure
It is recommended to incorporate the optional planted
root ESV4
(A)
to facilitate a rigid installation
.
1)
Switch off
and isolate the
mains electrical supply.
2)
Check that rating shown on luminaire label con-
forms with mains electrical supply.
3)
A suitable recess to be provided for planted root.
Ensure that a solid foundation as well as suf
fi
cient
mains cable length are provided.
4)
Remove
cover
B
from cast base
C
by releasing the
six countersunk screws
D
.
5)
Remove the frame from the
h
ead
u
nit by releasing
the four screws
G
.
6)
Disconnect the LED connection cable H.
7)
Remove the body of the head unit by removing the
four screws I.
8)
Feed the
mains supply cable
J
through the post
E
such that the cable can reach the head unit
.
The
supply cable is then fed through the appropriate
compression gland (round and flat grommets
supplied) and connected to the labeled terminals
L.
9)
Tighten the compression gland to secure the cable.
10)
Replace the body of the head unit by tightening the
four screws I, then reconnect H
, then replace the
frame by tightening the four screws G.
11)
Set luminaire in position and secure it by inserting
and tightening four bolts
F
fi
rmly.
12)
Reposition cover
B
and secure it by tightening six
countersunk screws
D
.
and the consequences thereof, are excluded.
cation carried out by the purchaser or third parties,
installation, application, operation and/or any modi
fi
-
Claims based on defects attributable to improper
luminaire).
must be observed (see illustration
------
m
inside
The minimum distance of an object to be illuminated
latest
applicable regulations and relevant legislation.
suitably quali
fi
ed p
erson i n c
ompliance w
ith t he
The product must be installed and maintained by a
Installation
3