3
Installation Procedure – QLS410/QLS420 LED
6ZLWFKRĪWKHPDLQVHOHFWULFDOVXSSO\
5HPRYHZDOOĦDQJH
A from cover B by
loosening
screws
C.
3. Check that rating shown on luminaire label
conforms with mains electrical supply.
4.
'HWHUPLQHSRVLWLRQVIRUWZRĥ[LQJVFUHZV
D.
Drill relevant holes E and insert wall plugs F.
Warning: Ensure not to damage any electric
cable, water pipe or other devices while drilling
holes. Fixture is intended to be mounted over a
UL listed junction box (not supplied by WE-EF),
use provided wall plate to cover boxes larger
than the outer dimensions of the luminaire.
5. Feed the mains supply cable G (and the second
cable for through wiring, if required) through
the pressure screw I
DWWKHVLGHRIZDOOĦDQJH
ZKLOHVHWWLQJDQGĥ[LQJZDOOĦDQJHLQSRVLWLRQ
The pre-installed packing ring H is suitable for
FDEOHGLDPHWHUVWRLQ,IWKHFDEOH
is bigger, replace the pre-installed packing ring
with the supplied auxiliary packing ring, which is
VXLWDEOHIRUFDEOHGLDPHWHUVWRLQ
6. Ensure the point arrow mark R
RQWKHZDOOĦDQJH
aims upwards and that the luminaire is properly
RULHQWHG)L[WKHZDOOĦDQJHE\LQVHUWLQJDQG
tightening screws D.
&RQQHFWPDLQVVXSSO\OHDGVWRUHVSHFWLYH
terminals in terminal block J:
a) ON/OFF (L = Phase, N = Neutral, = Earthing)
E9/ 3KDVH1 1HXWUDO
= Earthing,
D–
' 9FRQWUROOLQH
8. Tighten pressure screw(s) I.
9. Reposition cover B
RQZDOOĦDQJH
A and secure in
position by evenly tightening the screws C.
I
nstallation
The product must be installed and maintained
by a
VXLWDEO\TXDOLĥHGSURIHVVLRQDOLQFRPSOLDQFH
with latest building/construction and/or electrical
regulations and relevant legislation.
Warning:
6ZLWFKRĪPDLQVHOHFWULFDOVXSSO\SULRUWR
installing and connecting the luminaire.
Notice:
,IWKHOXPLQDLUHLVPRGLĥHGE\DQ\ERG\RWKHU
than the original manufacturer, then the warranty
will no longer be valid and shall become the full
responsibility of the modifying person/organisation.
Claims based on defects attributable to improper
installation and/or application, and the consequences
thereof, are excluded.
