4) Loosen the screw
J
to release the LED heat sink
K
and swing out.
5) Insert connection cable through the luminaire,
fix the luminaire to the bracket
B
and fasten
with the set screws
A
.
6) Connect the connection leads to terminal
I
in
accordance with the labelling.
For protection class II, the connecting cable
must be double insulated.
7) Fold in LED heat sink
K
and fasten using the
screw
J
.
8) Mount the frame
H
and firmly tighten the
mounting screws
E
.
I
K
Luminaire Replacement
The LED module can be replaced by qualified per-
sonnel with appropriate professional qualifications
and with standard tools. To do this, disconnect
the luminaire from the power supply and open it.
Replace the LED module and close it again. Make
sure that the seal is correctly positioned and close
the luminaire carefully.
Please take the designation of the LED module
from the type indicated on the luminaire.
