WE-EF FLD121 #2 Installation And Maintenance Instructions Manual Download

Page: 1 / 7

Surge Protection

This product features built-in surge protection circuitry in compliance with

applicable standards.

For comprehensive protection of a luminaire installation against lightning and

electrical surges, it is essential to cover mains supply and data input lines at

the distribution board level, by using respective primary (Type 1) and secondary

(Type 2) surge arrestors in compliance with EN61643-11/IEC61643-1.

Warning

Ensure that all required surge protection measures are in place and activated

prior to luminaire installation. Also, disconnect luminaires before operating

high-power devices such as, for example, electrical arc welders.

Do not open during installation

This product is factory-sealed.
Refer to the instructions contained in this
document for details.

WE-EF LEUCHTEN

Installation and Maintenance

Instructions

Projector

FLD121 #2 LED

FLD131 #2 LED

Summary of Contents for FLD121 #2







