background image

1

WARNING : 
This product to be installed by qualified personnel only. 

Switch off and isolate the electrical supply during installation. 

At no stage is the luminaire to be opened when live.
Connections and cables are labelled, before installation ensure the supply matches the 
luminaire designation.

ESD Sensitive Device: 
This luminaire contains electrostatic sensitive devices. Do not handle the LED PCB or LED 
connection leads without suitable ESD prevention methods in place.  If in doubt contact WE-EF 
LIGHTING or an authorised Sales partner.  Warranty can be void if the correct handling 
procedures are not observed. 

Surge Protection: 
For comprehensive protection of a luminaire installation against lightning and electrical 
surges, it is essential to cover mains supply and data input lines at the distribution board level, 
by using respective primary (Type 1) and secondary (Type 2) surge arrestors in compliance 
with EN61643-11/IEC61643-1.

1.

Luminaires designated with the type code ‘+A’ will have an internal Surge Protection Device 
(SPD) fitted.  Street and area luminaries are supplied with an external SPD.

D.

Where an external SPD is supplied, it must be fitted as per the supplied instructions to 
maintain warranty conditions.  

Ensure that all required surge protection measures are in place and activated prior to 
luminaire installation.  Disconnect luminaires before operating high-power devices such as, for 
example, electrical arc welders.

Cleaning: 

Apart from cleaning the product’s exterior surfaces, no special maintenance work is required.. 

DO NOT use high pressure cleaners on this luminaire 

Notice: 

Unless directed by this installation instruction, the luminaire is to be treated as Factory Sealed 
with no user serviceable parts.  If the luminaire is modified by anybody other than the original 
manufacturer, the warranty will no longer be valid and shall become the full responsibility of the 
modifying person/organisation. Claims based on defects attributable to improper installation 
and/or application, and the consequences thereof, are also excluded.

Summary of Contents for FLC230-CC









Reviews: