3
Installation
The product must be installed and maintained by a
VXLWDEO\TXDOLƂHGSURIHVVLRQDOLQFRPSOLDQFHZLWKODWHVW
building/construction and/or electrical regulations and
relevant legislation.
Warning:
Switch off mains electrical supply prior to
installing and connecting the luminaire.
Notice:
,IWKHOXPLQDLUHLVPRGLƂHGE\DQ\ERG\RWKHU
than the original manufacturer, then the warranty will
no longer be valid and shall become the full respon-
sibility of the modifying person/organisation. Claims
based on defects attributable to improper installation
and/or application, and the consequences thereof, are
excluded.
The installation on site must comply with local and/or
national health and safety regulations.
Important:
When mounting luminaires on concrete
or surfaces containing limestone content, WE-EF
recommends using mounting accessories – a short
post or a ground spike to prevent galvanic corrosion.
In areas where mounting accessories are not
applicable, ensure the luminaire’s aluminium base is
separated from concrete and limestone using a plastic
or rubber sheet. Allow concrete to cure before
installation – DO NOT INSTALL ON WET CONCRETE!
Handling:
(QVXUHWKHPRXQWLQJƃDQJHSODWHVDUH
handled with care, scratches and damage to the
coated surface can result in galvanic corrosion.
A WE-EF warranty does not cover any adverse reaction
or damage, due to improper installation and requests
that our recommendations are followed.
