3
Installation
The product must be installed and maintained by a
VXLWDEO\TXDOLƂHGSURIHVVLRQDOLQFRPSOLDQFHZLWKODWHVW
building/construction and/or electrical regulations and
relevant legislation.
Warning:
Switch off mains electrical supply prior to
installing and connecting the luminaire.
Notice:
,IWKHOXPLQDLUHLVPRGLƂHGE\DQ\ERG\RWKHU
than the original manufacturer, then the warranty will
no longer be valid and shall become the full respon-
sibility of the modifying person/organisation. Claims
based on defects attributable to improper installation
and/or application, and the consequences thereof, are
excluded.
Installation Procedure
1) Switch off mains electrical supply.
2) Check that rating shown on luminaire label conforms
with mains electrical supply.
3) Loosen pressure screw
R
and packing ring
G
. Place
pressure screw
R
and packing ring
G
around mains
cable
C
.
3XVKDWOHDVWFPRIPDLQVFDEOH
C
through
spigot
P
. Reposition packing ring
G
and tighten
pressure screw
R
to secure mains cable
C
.
5) Loosen locking screws
S
to allow insertion of
spigot
P
into spigot holder
H
. Keep support screw
T
tightened.
6) Align and lock support screw
T
using spigot
P
keyway.
7) Push luminaire up until spigot
P
is fully recessed
into spigot holder
H
. Rotate luminaire counter-
clockwise and allow it to rest on locating support
screw
T
.
8) Tighten locking screws
S
, to lock luminaire in posi-
tion.
9) Open luminaire by loosening screws
L
. Carefully
unhook lanyard
I
.
/RRVHQVFUHZV
J
(do not turn out). Rotate gear tray
M
counter-clockwise and pull out gently.
11) Connect mains cable
C
to terminal connector
K
.
12) Return gear tray
M
to its original position and
tighten screws
J
.
13) Reconnect lanyard
I
and close luminaire by tighten-
ing screws
L
.
