background image

2

Light Source
LED

Maintenance
Apart from cleaning the product’s exterior surfaces, no special maintenance work is required. 
Do not use high-pressure cleaners.

In case of component failure due to abnormal circumstances or at end of life, replacement must be carried 
out by a suitably qualified and trained professional.

Warning: Do not open luminaire while mains supply is switched on.

Caution: Risk of electric shock!

 

 

Important: To clean the glass panel, we recommend isopropanol 99% diluted 1:1 with distilled water. 
 
 
Installation
The product must be installed and maintained by a suitably qualified professional in compliance  
with latest building/construction and/or electrical regulations and relevant legislation.

Warning: Switch off mains electrical supply prior to installing and connecting the luminaire.

Caution: Risk of electric shock!

Notice: If the luminaire is modified by anybody other than the original manufacturer, then the warranty  
will no longer be valid and shall become the full responsibility of the modifying person/organisation.  
Claims based on defects attributable to improper installation and/or application, and the consequences 
thereof, are excluded.

Attention: The luminaire is factory-sealed and does not need to be opened during installtion. 
 
The installation on site must comply with local and/or national health and safety regulations.

Weight  

 

kg

for AFL110 

 

max. 4.70

for AFL120 

 

max. 6.95

for AFL130 

 

max. 8.60

Windage area 

 

m

2

for AFL110 

 

max. 0.092

for AFL120 

 

max. 0.146

for AFL130 

 

max. 0.191

Summary of Contents for AFL100 Series








Reviews: