6
Afterwards, lay the flat belts around the sub-platter
and the motor pulley; please ensure that the belt is not
twisted.
Please use the cotton gloves here in order to avoid
any oil and grease marks.
The belt embraces the sub-platter in the lower area of
the sub-platter scope (see fig.
F 3
).
Note: If you start the drive of the PE 4040 by turning it
on without having placed the platter, it may happen
that the drive belt falls off due to the low weight!
Next, put the platter on the sub-platter.
We recommend to always use a mat to acoustically
attenuate the platter, to gently playback your records,
and to reduce popping and cracking noises that can
occur because of antistatic charging.
F 3
- Assembly of the drive belt
on the pulley and the sub-platter
