Tele Indication, Type 10” Touch-V1
Index: 00
Date modified: 01/08/2017
OI No.: BA MR 002-00 Fernanzeige V1 EN.docx
Page 22 of 25
7
Maintenance, care, faults
7.1
Device maintenance
Clean the device at regular intervals.
7.2
Regular water check
Not required
7.3
Fault removal / Error codes
In the event of faults or malfunctions, please proceed according to the following description.
1.
Check the settings
2.
Restart the device
3.
Check the data lines
TIP!
It is also possible that switches or sensors are faulty and thus do not transmit any
electrical signals.
8
Decommissioning – Storage – Disposal
8.1
General
Decommissioning
Disconnect the device from the power supply for decommissioning.
Storage
Store the device in a dry place, using protective packaging.
Disposal of used parts and operating materials
Used parts and operating materials must be disposed of according to the regulations applicable at the site of
operation or they must be recycled. In case of doubt, information is available at your local institution
responsible for disposal or from the manufacturing company.
If this is not possible, dispose as hazardous waste.
9
Documents
9.1
Declaration of conformity
Not required
9.2
Wiring diagrams
No wiring diagram available
9.3
Commissioning protocol
No commissioning protocol required.
