Place the dehumidifier in a suitable position in the room.
Position away from windows or door area.
Connect to a suitable power outlet.
Make sure the water tank is placed in the proper position.
If the full bucket indicator is ON when first plugged in, pull the bucket out,
then push the water tank tback to the proper position. )
Turn clockwise the humidity control knob to a suitable
humidity setting (usually at normal position). If the humidity level
is over the set humidity, then the machine will start removing moisture.
For continuous operation set control to Continuous setting.
Full Tank Indicator
When the water tank is full, the full tank indicator lamp
will light up, and the dehumidifier will stop operating. Carefully
remove the water tank and discard this water.
Replace the water tank back to the proper position and the appliance will restart.
Defrost mode
If the ambient temperature is too low (below10
°
C), the dehumidifier will start defrosting
automatically. In this situation the defrost indicator is ON. Do not use in lower than 5
°
C temp.
Note. When the air intake filter is too dirty, the defrost indicator may be on also as the airflow is
being blocked. Remove and clean.
*Examples of extraction capacity based
on different temperature / humidity
conditions.
*Bold lines show the extraction capacity
of 27
0
C 60% RH and 30
0
C 80% RH.
*
