High-Resolution IR Camera
User Manual
Eyeball Camera
Issue V1.0 (2018-03-20)
9
Connect the BNC connector of the power or video cable to a video signal cable and
connect the other connector to a low-voltage power cable. After installing the camera,
directly connect the video cable and power cable.
Adjust the position of the camera by triaxial rotation: rotating horizontally, rotating up
and down, and performing lens axial rotation, and adjust the camera direction and lens
alignment target.
Figure 2-7 shows monitoring direction adjustment.
Figure 2-7
Monitoring direction adjustment
Step 6
Adjust view angle and focal length by using an adjusting tool, as shown in Figure 2-8.
( This step is only for WBXHDD28127P4W and WBXHDD28127P4G)
Figure 2-8
View angle and focal length adjustment
Set the zoom and focus value in UTC page of PTZ function of DVR user interface to adjust
the view angle and focal length when a Motorized lens camera is connected to the DVR
(Only for WBXHDD28121P4W and WBXHDD28121P4G).
Step 7
Use soft cloth to wipe the lens front glass which is likely to be soiled due to installation
for cleaning the camera, and complete product installation and debugging.
----End
