wbox 0E-TELBSET, User Manual

Page: 13 / 28

13
Table 5.
Keypad
Button Function
Talk ▪
The Talk button is used to power on the
0E -TELBSET
and
goes “Off Hook” if appropriate line voltage is detected.
▪
While in talk mode, the Talk button can be pressed to
“Flash” the line.
▪
The Setup menu is accessible in Talk mode.
Bell
▪
Pressing the Bell mode button will power off th
e 0E -TELBSET
.
▪ Goes “on-hook” if
the 0E -TELBSET
was in Talk mode
▪
Bell mode is used for caller ID and the incoming call ringer.
Monitor
▪
Monitor mode is used to listen for line condition and measure
line voltages.
▪
DTMF digits are captured and displayed.
▪ The setup menu is accessible in Monitor mode.
F1/F2/F3
▪
F1, F2, and F3 correspond to the options displayed on the LCD
screen directly above them.
Up/Left
Down/Right
Arrows
▪ In Talk and Monitor mode, these buttons are used to adjust
the volume.
▪
In the Setup mode, these buttons are used to scroll though
options, delete an entry, or add a space.
Speaker
▪
The Speaker button activates the loudspeaker on the back of
the
0E -TELBSET
and mutes the microphone.
▪ Hold the Speaker button down for 2 seconds to toggle the
backlight on/off.
Mute ▪
The Mute button silences the microphone while in Talk mode.
▪
When the loudspeaker is on, the mute button will mute
the loudspeaker and activate the microphone, a push to
talk function.
▪
In Monitor mode, hold the Mute button down to mute the
loudspeaker.
Setup ▪
The Setup button will display the setup menu in Monitor
or Talk mode.