High-Resolution IR Camera
User Manual
Error! Use the Home tab to apply
标题
1 to the text that you want to
appear here.
Issue V1.0 (2018-03-20)
5
1
Hardware Connection
Figure 1-1 shows the power and video cables.
Power and video cables
Connect the BNC connector of the power or video cable to a video signal cable and
connect the other connector to a low-voltage power cable (12V DC). After installing
the camera, directly connect the video cable and power cable.
The BNC video output interface is used to emit composite video signals. Monitors with a
resolution of higher than 800 TVL are recommended.
Summary of Contents for 0E-HDB1MP36
Page 2: ......