Digital Video Recorder(DVR)
User Manual
System setting
46
Issue V1.0 (2018-06-04)
Figure 6-9
Port mapping setting screen
Step 2
Click
next to
UPNP
to enable or disable the function of UPNP. The function is
enabled by default.
Step 3
After
UPNP
is disabled, you can manually set the HTTP port and Data port1.
Step 4
Click
OK
to save settings or click
Cancel
to cancel settings.
After UPNP button is enabled, System perform port mapping automatically.
If UPNP is set OFF, you need to forward the ports by manually on router.
----End
6.2.4 SMTP
If the Simple Mail Transfer Protocol (SMTP) function is enabled, the device
automatically sends alarm information to specified email addresses when an alarm is
generated.
Operation Steps
Step 1
On the
System setting
screen, choose
Network
>
SMTP
to access the SMTP setting
screen, as shown in Figure 6-10.
Summary of Contents for 0E-HD4C1TB
Page 2: ......
