iXchange Wall System Continued
Assembly
Instructions
507 E Grant Street, Thorp, WI 54771
P: 800.242.2303 F: 715.669.5929
2
www.wibenchmfg.com
Step 4:
Slide pairs of base cabinets together and fasten together with
joint connector bolts (p/n 0400236) and nut (p/n 0400229). Make
sure counter tops are pressed together tightly to minimize any
gap between panels.
Step 5:
Place the upper cabinets on to base cabinet with the 48” wide
cabinet (p/n iXW1155-2) in the center and 36” wide cabinets (p/n
iXW1180-1) on either side. The holes in the upper cabinets will line
up with threaded inserts in the countertop. Bolt into place using
joint connector bolts (p/n 0400236).
Step 6:
Bolt upper cabinets together using joint connector bolts (p/n
0400236) and nuts (p/n 0400229).
Step 7:
Bolt one finished end panel (p/n ixFEL) to cabinets using joint
connector bolts (p/n 0400236). Holes in cabinets will line up with
threaded inserts in the end panel.
continued
on page 3