wibenchmfg.com
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
2
Quad XL
Assembly Instructions
Step 6:
•
Place top on base cabinets. Align pre-drilled holes
on the base cabinets with threaded inserts in the top.
(There will be two pre-drilled holes in cabinet
(A)
and
one pre-drilled hole in each of the smaller cabinets.)
•
Using a 1/4-20x30mm joint connector bolt, (going
through one of the base cabinets) insert the bolt
through the pre-drilled hole up into the threaded insert
of the top. Use a 4mm Allen wrench or 4mm Hex bit
and a screw gun to fasten the bolt into place.
•
Repeat
Step 6
for the other base cabinets.
•
If shelving and doors were removed, place shelving in
first and then attach the doors.
Step 7:
•
Wire pulls are factory installed on the inside of door/s
to prevent damage in transit. (If you have a base
cabinet with double doors, use the clear tab to open
the doors.)
•
Unscrew each wire pull handle using a Phillips drill bit
and a screw gun.
Step 8:
•
Reattach with wire pull on the outside of the cabinet.
•
Repeat for other wire pull.
Step 8
A
Step 6
Step 7
*
