manualshive.com logo in svg

WB Mfg iXchange SSW1202-AL, Assembly Instructions Manual

Share
Download
WB Mfg iXchange SSW1202-AL Assembly Instructions Manual Download Page 10

wibenchmfg.com

507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303

Specifications are subject to change. Product 

images are for illustrative purposes only and may 

differ from the actual product.

10

iXchange® Wall

Assembly Instructions

SSW1202-AL

Step 12:  

•  Locate the cork strip and double top track. Slide the cork strip into the channel on the front of the upper track. 

Cut to fit. 

Step 13:  

•  There will be a double top track with 2” Forbo insert and a double bottom track with blade tray. (Both tracks will 

be pre-drilled. The cabinets will not have any pre-drilling.) Align the front edge of the double bottom track to 

the front edge of the base tops (

iXLWTop_72 

& 

iXRWTop_72

). Mount using 5/8” #8 truss head screws. Attach 

double track with blade tray to the top of the base cabinets using 5/8” #8 flat head screws. 

iXRWTop_72

iXLWTop_72

iXLBTop_71

iXRBTop_71

Summary of Contents for iXchange SSW1202-AL

















Reviews:

No comments

Brands by name

Popular brands

Load more brands