Shenzhen Waytronic Electronics Co., Ltd.
SmartSound V2.08
- 4 -
forepart of audio play.
4.5 How to replace audio files of Flash memory
Prepare some necessary tools such as computer, card reader and micro SD card ( capacity less than
8GB). Format micro SD card in the computer as the format of FAT32 file system. Then, copy the renewal mp3
audio file into micro SD card; then, insert micro SD card into SD card slot ; then long press A key (the left
one)and turn on the power switch (from OFF to ON). At this time, the indicator is flashing , Waiting about 6
seconds, release A key. After indicator light is off, that means audio replacement complete.
Note:
1. Before copying audio files into micro SD card, there should be no other files in micro SD card. MP3 file
name is without any special requirement.
2. The total audio file size cannot be over the Flash memory capacity, otherwise, there will be no audios or
only a few. If you do not want to play the audio of micro SD card when triggering, please remove micro SD
card then you can switch to internal FLASH.
If playing sequence is required, following steps can be help. We usually put these audio files into a folder.
Then change the audio file name to 3 Arabic number, like 001.002 or 003. and so on. , then press “Ctrl+A”,
click the right button on your mouse , select "send to removable disk" and choose the folder of SD card.
Then, copy audio files from micro SD card to into Flash.
4.6 Playing mode selection
There are A, B and random mode in total
How to select playing mode
:
1. Turn on the device , long press button A, when indicator flashes once, release this button. That is to select
A mode.
2. Long press button B, when indicator flashes once, release this button, which is to select B mode.
3. Long press button A and B at the same time, when indicator flashes once, release button A and B, which
is to select random mode.
What is A mode ,B mode and Random mode
1,A mode: cycle mode. Triggering once, it will play the next voice. When playing to the last, triggering again
will automatically return back to the first voice to play. After power on it will play from the second one.
2,B mode: single mode. Triggering once, it will play the current voice, not back to others, with the function of
power-down save.
3,Random mode: Triggering once, it is not sure to play which one.
Note: when battery is below 3.5V, indicator will flash; below to 3.2V, indicator will flash, not able to finish
playing or the speed will be slower.
4.7 Audition and setting triggering voice
A mode: press button A or B to change ; the induction triggering voice is the next voice of the current
playing voice. Track address is not power-down saved. With power up again,play voice from the second.
B mode: press A or B to switch to the previous or next voice. The induction triggering voice is the current
playing voice, that is also the current trial listening voice. Under this mode, it is able to save voice number
with power down.
Random mode: it is not sure to play which triggering voice.
4.8 Volume adjustment
When power on, pressing button A or B, it is now playing the sound, based on this , you can adjust the
volume via Volume control wheel. If you need louder sound, connecting amplifier of loudspeaker box is
available through 3.5mm standard earphone audio port.
