WayteQ N720B, User Manual, Page: 8 / 21

The charge indicator glows amber when charging is in progress. Do not disconnect your
device from AC power until the battery is fully charged, when the charge indicator turns
green. This will take a couple of hours.
1.3.4 Assembly
To get started, put the device into the holder and assemble holder with bracket. Take off
the protected film on the bottom or the suction. Then put the bracket onto a suitable
location of your windscreen or side window, make sure the window or the suction or
windscreen is clean and without water and some dirty things inside, fixing the stand on
that position..
Note: Controlling 5 different levels of suction by pressing down the button (See below
picture)
Controlling 5 different
levels of suction by
pressing down the button
Note: that some newer vehicles may have a heat reflective shield embedded in the wind
screen. In some cases this can prevent proper GPS signal reception. If this turns out to be
a problem in your vehicle, you will need to purchase and install the GPS external
antenna kit.
Under normal journey conditions, the suction mount is perfectly sufficient to hold the
bracket in position. Note that suction may be lost if left overnight, due to condensation
and low temperature. For this reason, and for security, we recommend Removing Both