User Manual
| 02
User Manual
| 03
e
3.
Specification
s
of Model No. G5-AR
/
RC
Note
: this device uses built-in, unchangeable Lithium battery. Battery time may vary, depending on which functions are used. For example, bright
backlight will consume more energy, which will reduce battery time.
To avoid fire or explosion, please do not poke, bump or take the battery apart, and do not throw it into burning fire, or water.
1.2 Using the charger
Connect the red and black wires to the motorcycle’s electrical system. Connect the other part to the charging port of the device.
When you start the motorcycle, the GPS navigator will turn on automatically.
2.
Power on/off
2.1
Power on
Please, make sure that the battery has enough charge or is connected to an external power source.
Note
: when travelling, keep in mind that the device needs time to adapt to a different environment before you turn it on. Sudden increase or decrease in
humidity may cause the mainframe to short circuit.
2.2
Power off
Press the button at the top of the device to turn it off; the device will enter power saving mode. When turned on again, it will restore
its last state.
Specification
s
of Model No. G5-W
CPU
MSB2531 800MHZ
Memory
256MDDR, 8GB Flash
LCD display
5” TFT LCD display
Resolution:
800RGB(H)x480(V)
Touch screen
Durable high-precision touch
screen
USB
USB Client 2.0, Mini USB port
TF
TF slot, supporting TF cards
up to 16GB
Audio
A: Built-in high fidelity speaker
B: High fidelity stereo ear-
phones
GPS
Cold start <42s; hot start
<3s(in the open area); warm
start <36s
Using the device
1. Power supply and charging
1.1 Power supply
There are two types of power supply: battery and adapter. The GPS navigator uses its built-in Lithium battery when it is
not connected to an external power supply via the adapter; external power when it is connected to motorcycle or car
.
The
icon in the upper right corner of the screen indicates the current battery charge.
3.
Resetting the system
If the device is not responding or is not working properly, you can reset it by using the stylus to press the reset button on the right
side of the device.
Note
: the unsaved data will be lost if your reset the system while it is not responding. It is recommended to make regular backups.
4.
Mounting Instructions (Motorcycle):
How to install the external current supply:
1.
Put the control knob (pict.) into the right position.
2.
Collect the 4 screws.
3.
The arrows show the direction in which the screws have to be put into
the holder. Use the 4 screws for fastening the mounting plate with the
ball head to the backside of the holding device.
4.
Now you can loosen the wing screw of the mounting block and put th
ball head into the holder. When the ball head is in the right position you
can fix it again.
(
see picture
)
Installation at the Handlebars:
Put the holder into an appropriate and easily accessible position and then fix it with
the included hexagon screws.
Caution: When fixing the holder take care that the view of important
instruments will not be covered by the navigation device.
Connect the cable of the holder to the power cable and fix it with the
waterproof ring.
Connection of the device to the power supply of the motorcycle
Connect the ends of the external power supply to the battery of the motorcycle.
Take care that the black cable will be connected to the negative pole of the
battery and the red cable to the positive pole
.（
see picture
)
5.
Stylus
(
for G5
-
W
&
G5
-
AR Only
)
The stylus is your means of interacting with the device. Do not lose it.
1.
Single tap: tap the screen once with the point of the stylus.
2.
Double tap: tap the screen twice with the point of the stylus.
3.
Drawing: tap once, hold, and then move the stylus on the screen.
Note
: a broken stylus, ball pen, or any other sharp or hard object will damage the LCD if you use it to operate the device.
CPU
MTK8163
/
MTK8127
Memory
1GB DDR, 16GB Flash
LCD display
5” TFT LCD display
Resolution:
800RGB(H)x480(V)
Touch screen
Durable high-precision touch
screen
USB
USB Client 2.0, Mini USB port
TF
TF slot, supporting TF cards
up to 32GB
Audio
A: Built-in high fidelity speaker
B: High fidelity stereo ear-
phones
GPS
Cold start <42s; hot start
<3s(in the open area); warm
start <36s
Battery
Built-in rechargeable Lithium
battery
Battery Charging port
DC 5V port
AC Charger
100/230V charger, 5V/1.5A
Car Charger
DC9-24V, 5V/1.5A
Operating System
Android 6.0
/
4
.
4
Navigation Software
I
n flash or SD card
Temperature
Operating Temperature: 0°C
to 60°C Storage
Temperature: -20°C to 60°C
Working humidity range
45% to 80%RH
Storage humidity range
30% to 90%RH
Atmospheric pressure
86KPa to 106KPa
Battery
Built-in rechargeable Lithium
battery
Battery Charging port
DC 5V port
AC Charger
100/230V charger, 5V/1.5A
Car Charger
DC9-24V, 5V/1.5A
Operating System
WinCE 6
.
0
Navigation Software
I
n flash or SD card
Temperature
Operating Temperature: 0°C
to 60°C Storage
Temperature: -20°C to 60°C
Working humidity range
45% to 80%RH
Storage humidity range
30% to 90%RH
Atmospheric pressure
86KPa to 106KPa
