13
Please Do Not Return This Product To The Store.
Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the
Find a Dealer
section online at
www.wayne-dalton.com
Tools Needed:
Tools Needed:
iNST
alla
Tio
N
NoTe:
If you have a model 9400/9600
Series door with windows in the top
section or 9100 Sonoma (8’ high), skip
this step and complete step 9.
NoTe:
Model 9100 Series door over 13’
wide require a 3” U-bar (supplied).
Place the 3” U-bar over the top rib.
fasten each end of the U-bar to the
endstile with (2) 1/4”- 20 x 11/16” self
drilling screws.
fasten center of the U-bar as shown
to the rib using (2) 1/4”- 14 x 5/8” self
tapping screws 6” to the left and 6”
inches to the right of the center of the
door section.
NoTe:
Upon completion of this step,
continue with Step 10.
NoTe:
If a 3” U-bar was installed in Step 8,
skip this step and continue with Step 10.
NoTe:
Model 9400/9600 glazed top doors
13’-0” wide or greater will be supplied
with a 3” asymmetrical U-bar for the top
section.
Place the 3” asymmetrical U-bar over the
top rib. fasten each end of the U-bar to
the endstile with (2) 1/4”- 20 x 11/16” self
drilling screws.
fasten center of the U-bar as shown to the
rib using (2) 1/4”- 14 x 5/8” self tapping
screws 6” off of the center of the door
section.
fasten both walls of the U-bar as shown
using 1/4”- 14 x 5/8” self tapping screws
every 30-36 inches for the top of the U-bar
and every 16-18 inches for the bottom of
the U-bar. (approximately 18 self tapping
screws per 18’ U-bar)
u-bar
u-bar - asymmetrical
(4) 1/4”- 20 X 11/16”
SELf DRILLING SCREWS
Power Drill
7/16” Socket
Driver
Power Drill
7/16” Socket
Driver
8
9
U-bAR
OPERATOR
bRACkET
(INSTALLED IN
STEP 10)
TOP DOOR SECTION
6”
6”
aTTachiNg ceNTeR oF u-baR
aTTachiNg eNDS oF u-baR
(2) 1/4”- 20 X 11/16”
SELf DRILLING SCREWS
1/4”- 14 X 5/8” SELf
TAPPING SCREWS
U-bAR
OPERATOR
bRACkET
(INSTALLED IN
STEP 10)
TOP DOOR
SECTION
30” TO 36”
6”
6”
aTTachiNg ceNTeR oF u-baR
aTTachiNg iNTeRmeDiaTeS oF u-baR
1/4”-14 X 5/8” SELf
TAPPING SCREWS
16” TO 18”
16” TO 18”
