Tools Needed:
20
Tools Needed:
Please Do Not Return This Product To The Store.
Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the
Find a Dealer
section online at
www.wayne-dalton.com
TorqueMaster
®
Spring Tube
TorqueMaster
®
springs come lubricated
and pre-assembled inside the
TorqueMaster
®
spring tube. To install, lay
the TorqueMaster
®
spring tube on the
floor (inside garage) in front of the door
with the labeled end to the left.
laBElED END
TORquEMasTER
®
sPRING TuBE
None
17
18
Center bracket bushing
NOTE:
If you are installing the
i
drive
®
opener on your garage door, skip this
step and continue with step 19.
NOTE:
If you are not installing the
i
drive
®
opener on your garage door, you
must install the center bracket bushing
assembly. follow these instructions for
non-
i
drive
®
operated garage doors.
NOTE:
If you are installing a
DoorMaster
™
opener, see optional
DoorMaster
™
Bracket installations on
page 32, figure a.
Being cam shaped the center bracket
bushing only fits one way.
slide the center bracket assembly
towards the center of the TorqueMaster
®
spring tube, from the right side as
shown.
NOTE:
upon completion of this step,
continue with step 20.
CENTER
BRaCkET
assEMBly
TORquEMasTER
®
sPRING TuBE
TORquEMasTER
®
sPRING TuBE
CENTER
BRaCkET
BushING
