Make sure that you install your unit on an even
surface to minimize noise and vibration.
The unit must be installed near a grounded
plug, and the Bottom Drainage Outlet of
Collection Tray (found on the back of the unit)
must be accessible.
The unit should be located at least 12 inches
(30 cm) from the nearest wall to ensure proper
air conditioning. The air vent blade should be at
least 19.7 inches (50 cm) away from obstacles.
Do NOT cover the Intakes or Outlets of the unit,
as this could cause damage to the unit.
The installation of the exhaust hose depends on the operating mode of the air
conditioner. When the air conditioner is in COOL mode, the exhaust hose is
required; when the it is in FAN or DEHU mode, it is not necessary to install the
exhaust hose.
Install Water Drainage Hose
During dehumidification mode, the upper drainage outlet on
the back of the unit must be connected to the drainage hose.
1. Unplug the rubber plug of the continuous drainage outlet
on the upper side.
2. Insert one end of the drainage hose into the continuous
drainage outlet.
3. Link the other end of the drainage hose to the sewer or
other container (basin or bucket).
