background image

SAFETY 
INSTRUCTIONS

For your safety, please read and keep the manual properly before or after using the unit. 

Please use the product in accordance with the instructions in this manual.

Unplug the dehumidifier from the power source when cleaning.

Do not splash water into the machine or put it near places where it can be splashed

Please do not

 

place the machine near a heating device or dangerous inflammable things.

Do not put your fingers or any hard materials into the air inlet or outlet.

Do not sit on the unit.

Drain the water properly (manual or continuous drainage).

Please make sure that the drain hose is installed on a downward slope so that the water can 
be drained out properly.

Do not place the machine on uneven surfaces.

Do not spray water on this machine.

Do not spray pesticides or flammable liquid on this machine.

Do not put or place heavy objects on the machine or place children and pets on the unit.

Do not place this machine in a confined space.

If

 

the power cord is damaged, please get a technical staff of the company to replace it. The 

replacement must be approved.

When using the laundry mode, please keep 40cm clearance between the clothes and the 
unit outlet,  to avoid the water drips into the dehumidifier and damaging the unit.

The wiring of the machine must be in accordance with 
national wiring regulations. The power cord should be 
connected to a reliable external naught wire.

The fixed wiring connected to the machine must be 
equipped with an all-pole disconnect device (air switch) 
with a contact distance of at least 3mm.

The specification of the fuse: 5A/250V.

At least 1m distance shall be kept from the surround 
objects when using the unit.

The minimum clearance between the unit and the 
surrounding may be ensured as the following  pictures.

P.01

8in

20in

Summary of Contents for DP138B



















Reviews: